At 03:13 PM 1/29/03 -0500, Barry wrote:
>Home Depot has both copper and galv grounds rods. The galv rods are
>several dollars cheaper. I installed about 1/2 of each when I did the
>ground field for my tower (3 rods each leg, cadwelds, etc.) I haven't
>had the opportunity to dig any of them up to see which decay more
>slowly.
For whatever it's worth, I recall threads here in past years recounting
concern about galvanic corrosion involving copper-plated ground rods and
the galvanized coating on Rohn guy wire anchor rods. There are reports
(mainly from a company that specializes in sacrificial cathodes to prevent
such problems) of guy anchor rods corroding through as a result of this
phenomenon. My suspicion is that this would only be a problem if you have
copper ground rods relatively close to your guy anchors. I had grounded
guys, so I replaced the guy ground rods with galvanized ones.
73, Pete N4ZR
The World HF Contest Station Database has just been updated.
Are you current? www.pvrc.org/wcsd/wcsdsearch.htm
|