To: | <towertalk@contesting.com> |
---|---|
Subject: | [Towertalk] Power ground rod driver summary, and a question |
From: | faunt@panix.com (Doug Faunt N6TQS +1-510-655-8604) |
Date: | Thu, 28 Nov 2002 15:18:49 -0500 (EST) |
Note that ground rods are allowed to be put in the ground at an angle up to 45 degrees or buried in a trench at least 2 1/2 feet deep if the rock is too close to the surface. Greenlee used to make a ground rod driver that fit into a standard handheld airhammer. Unfortunately, when I saw one, I didn't have compressed air handy, and now that I have compressed air handy, I can't locate the driver. I have used that sort of air hammer for digging in the extremely tenacious clay that's about 3' down here. 73, doug |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Towertalk] Power ground rod driver summary, and a question, SavageBR@aol.com |
---|---|
Next by Date: | [Towertalk] Bulkhead Installation for Severe WX, Ken Widelitz |
Previous by Thread: | [Towertalk] Power ground rod driver summary, and a question, Chuck Counselman |
Next by Thread: | [Towertalk] Power ground rod driver summary, and a question, SavageBR@aol.com |
Indexes: | [Date] [Thread] [Top] [All Lists] |