Greetings,
I have 11 sections of Rohn 45G tower + accessories for sale. All sections
are in good condition with exception of one as noted below. There is
superficial surface rust on some sections, but overall the tower is clean.
Included in the deal are:
11 Rohn 45G straight 10' sections
3 torque arm assemblies (GA45GD + Torque Bars TB45D)
1 TA 45 torque arm
1 flat top plate
15 3/16" EHS guy cable assemblies with cable grips on each end (6 grips
cut; the rest are useable)
1 work platform WP45G
3 sets of equalizer plates
1 collection of nuts, bolts & turnbuckles. All the nuts and bolts are in
good shape; only a few missing, a few of the turnbuckles are rusted and
should be replaced.
The section of tower that was at the top has one of the bottom horizontal
rungs cut loose from the joint at the leg. It is repairable by welding and
coating with cold galvanizing compound, or it can be cut out completely or
left as is. It is detailed in the photos. Buyer's discretion as to action
on this issue.
Also, I have a working relationship with a local galvanizer. I can offer to
have the tower, torque arms, top plate and work platform stripped to bare
metal via acid bath and freshly galvanized at buyer's expense of $.32 / lb.
The sections weigh ~70lbs. each, so total galvanizing cost will be ~$250
for just the tower. The torque arms and other accessories do not need
galvanizing at all, but could be included at additional cost.
I can deliver the collection within a reasonable driving distance of
Nashville, TN; contact me off list for details. I have pictures of the
dismantled tower in an Adobe Acrobat file that I can send via E-mail to
interested parties.
I'm looking for $2100 OBO for all of it, delivery optional depending on
distance. Feel free to make reasonable offers.
Thanks,
Robin Midgett KB4IDC
615-322-5836 office - rolls to pager
615-835-7699 pager
615-773-4198 home
rmidgett@bellsouth.net
robin.midgett@vanderbilt.edu
|