I as well have about 10 of these .. and indeed they are very nice looking
and well built.. however the ISOLATION is lacking.. so the result is i never
seem to work them into any schems here that involve any medium power level
or better.. but i would love to find some actual power handeling rateings..
good lck and we will see what drags up.. mac/mc
----- Original Message -----
From: dan hearn <dhearn@ix.netcom.com>
To: <towertalk@contesting.com>
Sent: Monday, November 18, 2002 9:43 AM
Subject: [Towertalk] Transco Switches
>
> I would appreciate any help in finding the HF power rating of 2 Transco
> switches.
>
> 1. PN 11880,sn 255 SPDT 115vac. Also has number 85152 on it. It is a
> latching job with a coil for closing and another for opening. It was
> picked up at a flea market and the 2 coils are connected in parallel.
> Does this mean that it will alternate between open and close with
> application of a short burst of 60 hz power to the 2 paralleled coils?
>
> 2. PN 14704,sn not readable SP3T 28vdc. Has 3 coils, one for each
> contact.
>
> It appears that it would not be difficult to disassemble these for
> contact cleaning or repair. Anyone had experience doing this?
>
> Tnx for any help, Dan, N5AR
> __________________________
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
|