In a message dated 10/23/02 2:58:57 AM Pacific Daylight Time,
davidw@copper.net writes:
> I'm looking for 24 'tower legs':
>
> 1. Material: galv-after-fab. steel, or s/s
> 2. Length: 4-5ft
> 3. Dia.: 1in -to-1 1/4in.
> 4. 90-deg 3in-long bend one end, "std" thread for at least 8in at the
> other end
>
What exactly are you looking for? What you're describing are anchor
bolts. Any particular type or grade of steel? The all-thread you can buy at
your local hardware store is a common type of steel that is the same grade as
the UST anchor bolt spec so you really don't need anything special.
An off-the-shelf option is US Towers. They use these all the time.
BTW you don't need 4-5 feet of anchor bolts. After a short distance (20"
for 1" material - I'm going from memory but the concept is the same) there
are no longer any forces on the bolts - it's all on the concrete after that.
I think US Tower bolts are around 3' (sorry - I'm going from memory again).
Cheers,
Steve K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
|