[Towertalk] Bolt Coating

[K7LXC@aol.com (K7LXC@aol.com)]

In a message dated 10/16/02 9:25:56 AM Pacific Daylight Time, 
hwardsil@centurytel.net writes:

> Also, gooping up tower joints (bearing grease is cheaper) makes that next 
> section slip right on (or off, much later).

    True enough. The only exception would be if you want to shunt-feed the 
tower. In that case I'd use an anti-oxidant instead.

Cheers,
Steve    K7LXC
TOWER TECH