Towertalk
[Top] [All Lists]

[Towertalk] attaching coax to the tower legs

To: <towertalk@contesting.com>
Subject: [Towertalk] attaching coax to the tower legs
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Tue, 8 Oct 2002 00:44:54 EDT
In a message dated 10/7/02 6:26:43 PM Pacific Daylight Time, KB2HUK@aol.com 
writes:

> In what fashion should coax coming down the tower be attached to the legs 
of 
>  the tower , I am using LMR 400 Coaxial cable ?

    Actually I'd tape it myself, using a wide multi-wrap for the top of the 
run to spread the holding force over a larger area. 

    The problem with the foam dielectric is cold flow - that is, the foam 
being a plastic material of sorts will migrate due to pressure over time. 
That's why CushCraft says not to use it for their wound RF chokes. 

    Tape's fine - just don't ask it to do anything too "structural"; i.e. 
hold much weight. 

    If you're really worried about it (next time buy RG-213 or something 
else), use a Kellum/hoisting grip like the pros do. 

Cheers,
Steve    K7LXC
TOWER TECH 

<Prev in Thread] Current Thread [Next in Thread>