I also used the large heat-shrink with the built-in glue and replaced the
entire old heat-shrink.
Bill, N3RR
----- Original Message -----
From: "K9AJ" <mcgirr@interaccess.com>
To: <towertalk@contesting.com>
Sent: Friday, September 20, 2002 12:03 PM
Subject: [Towertalk] 402CD coil mods
> Hello All,
>
> I wonder if those who have modified the loading coil assembly on the
> CushCraft 402CD (replace the existing screws that attach to the coil w/
> stainless steel bolts & locking nuts) can tell me what material they used
> to re-seal the loading coil assembly? If shrink tubing, what size (the
> aluminum tubing the coil is mounted on is 5/8")? Would high quality
> electrical tape work? Any thoughts regarding this mod?
>
> Thanks,
>
> Mike/K9AJ
>
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|