Towertalk
[Top] [All Lists]

[Towertalk] Phillystran break strength vs. diameter?

To: <towertalk@contesting.com>
Subject: [Towertalk] Phillystran break strength vs. diameter?
From: llindblom@juno.com (llindblom@juno.com)
Date: Thu, 12 Sep 2002 19:36:49 GMT
It could easily be cut by a vandal with a knife or by accident.  EHS near the 
ground is much harder to accidently cut and it is guaranteed to dull even the 
sharpest knife.

W0ETC

---------- Dino Darling <k6rix@arrl.net> writes:

From: Dino Darling <k6rix@arrl.net>
To: towertalk@contesting.com
Subject: Re: [Towertalk] Phillystran break strength vs. diameter?
To: <towertalk@contesting.com>
Date: Thu, 12 Sep 2002 11:47:28 -0700

Could someone explain this... (see below)?

Dino...K6RIX
k6rix@arrl.net

----- Original Message ----- 
To: <towertalk@contesting.com>
Sent: Thursday, September 12, 2002 10:00 AM
Subject: Re: [Towertalk] Phillystran break strength vs. diameter?


 "...the factory said never never never use phillystran at ground level."
_______________________________________________
Self Supporting Towers, Wireless Weather Stations, see web site: 
http://www.mscomputer.com
Call 888-333-9041 to place your order, mention you saw this ad and take an 
additional 5 percent off
any weather station price.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk





<Prev in Thread] Current Thread [Next in Thread>