You do NOT want any conductors over 12 ft long between
insulators anywhere near an antenna for 10M. Note that
the first insulators must be less than 5 ft from the tower
to meet this requirement since there is continuity through
the tower.
I would use Philystran or some other NON-STRETCH
non-conductor such as a rope that meets these requirements.
How much guy length could you possibly need on a roof top?
How cheap do you need it to be?
Tom N4KG
On Tue, 10 Sep 2002 Eric Rosenberg <wd3q@erols.com> writes:
> For my 11 ft roof tower that I have to guy. will it make a difference
>
> whether I use Phillystran HPTG2100i or steel guy wire?
>
> Certainly there is a price difference!
>
> Thanks in advance,
>
> Eric W3DQ
> Washington, DC
>
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
> http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and
> take an additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
|