[Towertalk] Mast Coupler

To:	<towertalk@contesting.com>
Subject:	[Towertalk] Mast Coupler
From:	k5ya@gvtc.com (Dennis Mowers)
Date:	Tue, 10 Sep 2002 08:20:22 -0500

Has anyone built the shock absorbing mast coupler described in Leeson's
"Physical Design of Yagi Antennas"?

He describes a BMW "flex disc", used to isolate the drive shaft from the
transmission.

My local NAPA auto parts supplier shows nothing in their books for any
year BMW.

I will try BMW next.

Has anyone ever seen one of these things?

Dennis, K5YA

<Prev in Thread]	Current Thread	[Next in Thread>
[Towertalk] Mast Coupler, Dennis Mowers <= [Towertalk] Mast Coupler, <w5mc@sbcglobal.net (Mac) [Towertalk] Mast Coupler, Lee Noonan Re: [Towertalk] Mast Coupler, Michael Tope [Towertalk] Mast Coupler, Bob Nielsen [Towertalk] Mast Coupler, Jim White [Towertalk] Mast Coupler, Dino Darling [Towertalk] Mast Coupler, Dennis Mowers [Towertalk] BMW -- Mast Coupler, Lee Noonan [Towertalk] Mast Coupler, K7LXC@aol.com [Towertalk] Mast Coupler, GALE STEWARD

Previous by Date:	[Towertalk] C3 Rivets, N6ZO@aol.com
Next by Date:	[Towertalk] Steel vs Phillystran on a Roof Tower, Steve Katz
Previous by Thread:	[Towertalk] Steel vs Phillystran on a Roof Tower, Eric Rosenberg
Next by Thread:	[Towertalk] Mast Coupler, <w5mc@sbcglobal.net (Mac)
Indexes:	[Date] [Thread] [Top] [All Lists]