[Towertalk] Prop-Pitch

Towertalk

[Towertalk] Prop-Pitch

To:	<towertalk@contesting.com>
Subject:	[Towertalk] Prop-Pitch
From:	k9zm@frontiernet.net (Greg Gobleman)
Date:	Sat, 1 Jun 2002 22:24:52 -0500

I was looking at the photos of this prop pitch, not having seen one mounted
I was trying to figure out how they are installed.  I assume the flat plate
area is bolted to a stationary plate.  Is a notched piece made to adapt to
the mast pipe?  I also have read of needing to rig a directional indicator
of some kind.  Any info on that?  May I assume that the control box and
indicator will probably cost as much as the rotor?

73
Greg K9ZM

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[Towertalk] Prop-Pitch, Rick Dougherty [Towertalk] Prop-Pitch, Richard Hassell-Bennett [Towertalk] Prop-Pitch, Greg Gobleman <= [Towertalk] Prop-Pitch, N9EN@VOYAGER.NET [Towertalk] Prop-Pitch, dan hearn [Towertalk] Prop-Pitch, GALE STEWARD [Towertalk] Prop-Pitch, Gerald D'Entremont [Towertalk] Prop-Pitch, Stan & Patricia Griffiths

Previous by Date:	[Towertalk] Tribander identification, Mark Beckwith
Next by Date:	[Towertalk] Prop-Pitch, N9EN@VOYAGER.NET
Previous by Thread:	[Towertalk] Prop-Pitch, Richard Hassell-Bennett
Next by Thread:	[Towertalk] Prop-Pitch, N9EN@VOYAGER.NET
Indexes:	[Date] [Thread] [Top] [All Lists]