[Towertalk] TB3 Set Screw

[K7LXC@aol.com (K7LXC@aol.com)]

In a message dated 5/15/02 12:50:21 PM Pacific Daylight Time, 
jsbmjb@theriver.com writes:

> Is it necessary to secure the TB3 set screw with loctite before
>  installing the bearing on the mast? 

    No. There is a locking nut on the bolt anyway. It only rotates at 1 RPM 
so not much danger of it coming loose.

Cheers,
Steve      K7LXC
TOWER TECH