I have had this rotor for about five years in two different locations.
Location 1:
Tennadyne T-10 LP 24' boom 13-30 mhz log periodic @ 72'
2 x 22 el K1FO 70cm long yagis @ 78'
1 x 12 el K1FO 2m yagi @ 78'
Full AZ/EL with 12' fibreglas crossboom and KR-400 elevation rotor
Diamond X-500 17' vertical at top of mast
This went through five major ice storms. The rotor worked flawlessly.
Location 2:
Tennadyne T-6 LP 12' boom 13-30 mhz log periodic at 50'
2/70cm Arrow J-Pole at 60'
Only one small ice storm at new qth.
The rotor was taken down fro qth #1 and stored for 3 years before being put
up where I am now.
I don't know how big an array you can put on this rotor, but as you can see
from example #1 above, I had quite a bit of loading on it. I have been VERY
happy with this rotor. The 450 deg rotation, presets and variable speed are
quite nice. I would certainly buy another one and had been using nothing but
Ham IV's prior to this change. Hope this helps, 73
...hasan
----- Original Message -----
From: "Warren McKenzie" <w_mckenzie@msn.com>
To: <towertalk@contesting.com>
Sent: Thursday, May 09, 2002 6:31 PM
Subject: [Towertalk] Rotator
> It looks like Hy-Gain is having some supply problems as they are being
> absorbed so I am looking at alternative rotators. The Yaesu G-1000 DXA
> has been suggested. Does anyone have experience with this rotator. Any
> comments and advice would be appreciated.
>
> Thanks
>
> Warren
> KD7QGA
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|