Towertalk
[Top] [All Lists]

[Towertalk] rotator cable lightning protection

To: <towertalk@contesting.com>
Subject: [Towertalk] rotator cable lightning protection
From: goudpj@mac.com (Pete Goudreau)
Date: Wed, 20 Mar 2002 21:31:11 -0600
After some research, including towertalk archive searches, it looks 
like the only protection units out there for control and rotator 
cables are shunt types - Polyphaser and I.C.E. come to mind.  While 
researching the topic, there also seems to be a goodly number of 
stories of lightning surges getting past exploding MOVs in said 
protectors and blowing up most of the equipment in the shack.

Not being much of a fan of MOVs in the first place, I figured there 
had to be some series type protectors out there somewhere but I'm not 
finding them at all.  Design is relatively easy but extremely 
difficult to test correctly.

Anybody have any suggestions as to the safest way to keep the lines 
connected but well suppressed?

Thanks in advance,
Pete, AD5HD (ex-WB5RKC)

<Prev in Thread] Current Thread [Next in Thread>