At 17:25 3/4/2002 -0800, Al Baker wrote:
>Eric at M2 recommended using RG8X for the reed
>switching pair of leads...keeping the power leads as
>the 2 x 12. Before I go buy 320 feet of RG8X I wanted
>to hear from any of you on the reflector as to whether
>you think this will cure the gremlins.
I'm using an M2 2800P-A with their reed switch kit in
a prop-pitch. I'm using RG58A/U for my cable run to
the reed switch with a separate run of UF rated
Romex for the p-p motor feed. Works wonderfully.
My cable run is considerably shorter than yours so
RG8X may be needed for 320 ft.
73 Phil NA4M
-. .- ....- -- -. .- ....- -- -. .- ....- -- -. .- ....- -- -. .-
....- --
Phil Duff NA4M na4m@arrl.net Georgetown, Texas
|