In a message dated 2/24/02 5:51:07 PM Pacific Standard Time,
sloss@mindspring.com writes:
> Have two pieces of M2 1 1/4 to 1" boom mat'l that just won't come apart.
> Any favorite suggestions.
Sure. Heat the big one with a propane torch and use some cold spray on
the little one.
>
> Am considering a late production used C3E but owner says that he has rather
> large SWR swings on 10m when the wind blows. Has there been any mods by
> owners or Force 12 to keep element spacing somewhat constant when the wind
> blows?
Sure. Install a piece of plastic or plexiglass or wood on the end of each
3-element sleeve. Secure with little hose clamps (I suppose black cable ties
will work as well) and you're all set. It's a recommended mod. (By end I mean
near where the 3 elements end.)
Cheers,
Steve K7LXC
Tower Tech
________________________________________________________________________
Where do you get ICE bandpass filters & beverage matching boxes? The
same place that pays for the hosting of this list: The eHam Store.
Order online at http://store.eham.net.
-----------------------------------------------------------------------
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|