Be careful heating alloys, lest you weaken them. Universal uses 6063-T832 for
the legs. I don't know the max to which it may be heated without altering it,
but I'm sure this information is available, possibly from one of the aluminum
manufacturers' associations or an engineering or materials handbook.
Furthermore, I don't know how you can control the temperature while heating
with a torch. You can't judge temperature of aluminum by color as you can
with steel. If you don't intend to use it again, saw them apart!
73 de WOØW
Jim White, K4OJ wrote:
> Banana
>
> if you are going to try to heat the larger diameter I recommend you do this
> while the joint is under pressure to separate...aluminum is excellent at
> conduction of heat fast....or cool....that's why it is perfect for liquid
> refreshment containers...if you heat, turn off the torch, put it down, then
> wiggle the joint by that time a lot of the benefit will be lost.
>
> K4OJ
>
> ----- Original Message -----
> From: <n4kg@juno.com>
> To: <TOWERTALK@contesting.com>; <BruceAA5B@aol.com>
> Sent: Friday, February 22, 2002 6:08 AM
> Subject: Re: [TowerTalk] aluminum tower disassembly?
>
> >
> > When I disassembled my dad's Heights Aluminum 40 ft tower,
> > I lowered first and used a car jack to separate the sections.
> > Two of the joints were so tight that I pulled the legs apart
> > below the joint. Others on TT have recommended a combination
> > of heat on the outside tube and cold water on the inside tube.
> > Some chemical solutions have also been proposed in the
> > archives.
> >
> > Tom N4KG
> >
> > On Thu, 21 Feb 2002 BruceAA5B@aol.com writes:
> > >
> > > My tower has to come down. It's a very hefty 60-ft free-standing
> > > tapered aluminum job (Universal, I think) that's been in place for
> > > about 20 years, and I'm looking for advice on disassembly. I erected
> > >
> > > most of it by tilting it up on a hinged base (5 big guys pushing, 3
> > > up
> > > on the roof pulling), but now there are trees and house additions
> > > that won't let the process work in reverse.
> > >
> > >
> > > I haven't tried to do anything yet, so maybe it'll go smoothly and
> > > I'm worried for no good reason. But just in case there's a problem,
> > >
> > > how about some tips? Is there some good stuff to spray into the
> > > joints ahead of time to loosen them up? Does heating help? Will a
> > > tower jack be necessary? Is it time to hire a crane to pick the
> > > whole thing up from the base and lay it down?
> > >
> > > Would like to hear from anyone who has had to dissassemble one
> > > of these after being up for so long.
> > >
> > >
> > > -Bruce AA5B
> > >
> > > BruceAA5B@aol.com
> > >
> > >
> > ________________________________________________________________________
> > > Where do you get ICE bandpass filters & beverage matching boxes?
> > > The
> > > same place that pays for the hosting of this list: The eHam Store.
> > > Order online at http://store.eham.net.
> > > -----------------------------------------------------------------------
> > >
> > > -----
> > > FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> > > Submissions: towertalk@contesting.com
> > > Administrative requests: towertalk-REQUEST@contesting.com
> > > Problems: owner-towertalk@contesting.com
> > >
> >
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today! For your FREE software, visit:
> > http://dl.www.juno.com/get/web/.
> >
> > ________________________________________________________________________
> > Where do you get ICE bandpass filters & beverage matching boxes? The
> > same place that pays for the hosting of this list: The eHam Store.
> > Order online at http://store.eham.net.
> > -----------------------------------------------------------------------
> >
> > -----
> > FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> > Submissions: towertalk@contesting.com
> > Administrative requests: towertalk-REQUEST@contesting.com
> > Problems: owner-towertalk@contesting.com
> >
>
> ________________________________________________________________________
> Where do you get ICE bandpass filters & beverage matching boxes? The
> same place that pays for the hosting of this list: The eHam Store.
> Order online at http://store.eham.net.
> -----------------------------------------------------------------------
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
________________________________________________________________________
Where do you get ICE bandpass filters & beverage matching boxes? The
same place that pays for the hosting of this list: The eHam Store.
Order online at http://store.eham.net.
-----------------------------------------------------------------------
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|