If you'll read down carefully, you'll see that I said:
> The tubing through which the cable/wire runs is simply placed through
> holes of corresponding size drilled through the bed of 2x12's [rear-most
> one], and at a slight angle to the rear with the 'blade' of [in my case]
> stainless steel [not aluminum panel - that was the first one!]. This
^^^^^^^^^^^^^^^^^
> 'blade' is bolted to the middle 2x12 by two pieces of 1/8" aluminum
> stock that is bolted through the middle 2x12.
Don
N8DE
________________________________________________________________________
Where do you get ICE bandpass filters & beverage matching boxes? The
same place that pays for the hosting of this list: The eHam Store.
Order online at http://store.eham.net.
-----------------------------------------------------------------------
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|