----- Original Message -----
From: "John & Margaret Weatherley" <teamw@quixnet.net>
To: <towertalk@contesting.com>
Sent: Saturday, January 05, 2002 8:34 AM
Subject: Tower modelling?
> Can someone advise me on the method of modelling a Rohn 25 tower in
Mininec?
> Do you consider it as a 10-12 inch diameter thick wire (tube) or three
> vertical parallel wires or what?
>
> " The only foolish question is the one not asked -anon"
>
> de AB4ET
Thanks for all of the useful responses. I do not intend to load up the tower
as a vertical (at least not in the short term). What I want to do is model
some wires hanging from it for 80 and 160, such as slopers, for my
particular situation.
de
AB4ET
________________________________________________________________________
This list is sponsored by the new eHam.net Store. When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list. Check it out at http://www.eham.net.
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|