Hi Bob,
All you have to do is tape a thin piece of paper to the bottom,
then rub the paper over the holes with the "side" of a lead pencil
point. Your pattern will then be transferred to the paper.
73,
Charlie, N0TT
On Thu, 29 Nov 2001 20:05:10 EST ROBKEL@aol.com writes:
>
> I need to obtain a mounting bolt drill template for a TailTwister. I
> bought a
> rebuilt one from Norm's Service, and the manual did not include the
> template.
> The tower mounting shelf is for the 4 bolt rotator versions, and I
> need to
> add the other two holes (and check what's already there).
> You can provide private reply to W5LT@aol.com.
> Thanks
> Bob W5LT
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our
> self
> supporting towers up to 100 feet for under $1500!!
> http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|