Towertalk
[Top] [All Lists]

[TowerTalk] SB-1000 help

To: <towertalk@contesting.com>
Subject: [TowerTalk] SB-1000 help
From: WA7AA@home.com (Zoran Brlecic)
Date: Sat, 24 Nov 2001 15:44:53 -0800
KI9A@aol.com wrote:

> My well used ( abt 60k QSO's) SB-1000 died this weekend, popped both fuses on
> back. I notice no bad smell or smoke, & I assume it is a cooked transformer.

Probably, but it could also be the diodes.

> Where can I find a replacement? Does the AL-80 transformer work?

 http://www.pwdahl.com/ham%20catalog.htm  for a direct replacement.

The AL-80 xformer would work after rewiring and remodeling the supply (I believe
the SB-1000 xformer is wired as a voltage doubler, whereas the AL-80 uses a full
wave diode bridge.


73 ........ Zoran WA7AA




List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>