Towertalk
[Top] [All Lists]

[TowerTalk] 450 ohm ladder line and rfi ?

To: <towertalk@contesting.com>
Subject: [TowerTalk] 450 ohm ladder line and rfi ?
From: n4kg@juno.com (n4kg@juno.com)
Date: Wed, 14 Nov 2001 08:34:11 -0600
I have 3 - 80M dipoles, a 100 ft centerfed dipole, and a 20M dipole
all fed with 450 ohm Ladder Line.  The only RFI problems I experienced
were to / from my (old) station computer.  I don't see these problems
with a laptop computer.

Tom  N4KG

On Tue, 6 Nov 2001  "Mike Brown K9MI" <k9mi@home.com> writes:
> 
> At several locations in the past, I've used 450 ohm ladder
> line, and never had any problems with RFI at 100 watts.
> How about at 500 watts ? We're on a small lot and I 
> have had multiple dipoles up fed with coax, but would 
> like to try just using one dipole again. 
> 
> Thanks..   Mike K9MI
> 
> 
> 
> 
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower 
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our 
> self
> supporting towers up to 100 feet for under $1500!!  
> http://www.anwireless.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>