Towertalk
[Top] [All Lists]

[TowerTalk] George de Lee....Aluminum threaded machine screws?

To: <towertalk@contesting.com>
Subject: [TowerTalk] George de Lee....Aluminum threaded machine screws?
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Thu, 8 Nov 2001 09:12:33 EST
In a message dated 11/7/01 9:51:41 PM Pacific Standard Time, 
leewical@lava.net writes:

> I've used LOCTITE (SP?). The kind of LOCTITE to be used is the one you can
>  remove the machine screw later.
>  NOT the permenent LOCTITE which you cannot remove w/o doing some real 
damage.
> 
>  
>  George:
>   Where do you find your product? Does it have a product name? WEB site?
>  USPS address? I'm willing to try it. It might help me in my professional
>  work.....

    LOCTITE is available from ANY auto parts store as well as lots of 
hardware stores. I *think* the red one is the permanent one and the blue one 
is the removeable version.

Cheers,
Steve    K7LXC
Tower Tech 

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>