Towertalk
[Top] [All Lists]

[TowerTalk] please advise on terminated vee beam design

To: <towertalk@contesting.com>
Subject: [TowerTalk] please advise on terminated vee beam design
From: dhearn@ix.netcom.com (dan hearn)
Date: Sat, 03 Nov 2001 07:17:29 -0800
A friend, N5RM in north Texas built a beautiful array of sloping V beams
which covered all directions. The center was at 200ft and the low ends
came to 8 ft posts. A wire ran down each post to a large power
terminating resistor and to ground rods. It sounds like a dream array,
however he told  me it was not nearly as effective as he expected. He
felt that it needed a ground screen beneath it. 
  My ARRL Antenna Book is 17th edition also. It mentions loss at the
ground termination being a problem and suggests a radial system. 

73, Dan, N5AR

Don Hall wrote:
> 
> Con,
> 
> I don't have a new one, but the 17th edition of the ARRL Antenna Book has a
> discussion of the terminated sloping V on page 13-9. Suggest you look at
> whatever edition you have.
> 
> 73  Don  K5AQ
> 
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>