Good luck with your 4-Square, Ken. I hope you'll take a few pictures so that
we can all see how the project progresses.
Tim, EI8IC.
----- Original Message -----
From: "Ken "AB5A" Eckel Jr." <ka5nez@clarc.org>
To: <towertalk@contesting.com>
Sent: 05 October 2001 06:48
Subject: [TowerTalk] 80M 4Square
>
> Fellow Reflectees:
>
> Tomorrow, if it don't rain, I will be raising my 80M 4Square elements.
> These
> will be 1/4 wave elements made from 4 inch irrigation pipe. I hope to get
> this
> up and put down about 10 radials each elements just to get it on the air
to
> work the 3DA and C9 guys. I have plans to put down a complete ground
> screen with tie buses. I will still need to trench in the feedlines
first.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|