Towertalk
[Top] [All Lists]

[TowerTalk] U Bolts

To: <towertalk@contesting.com>
Subject: [TowerTalk] U Bolts
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Tue, 2 Oct 2001 00:22:19 EDT
In a message dated 10/1/01 2:16:11 PM Pacific Daylight Time, w7zr@citlink.net 
writes:

> Does anyone know the size of the u bolts used for the coax arms for the
>  ma550 tubular crank up.  There should be 3 different sizes.  How long are
>  the arms?

    There aren't any big U-bolts; they are round pieces of bent metal the 
size of the section so they just fit around that section top with a bolt that 
goes thru tabs on the end. The standoff parts are welded to the connector 
piece. 

Cheers,   
Steve     K7LXC
Tower Tech 

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>