Any Fastener Supply outlet (see your Yellow Pages)
or good hardware store should be able to supply them.
I found a supplier who was able to ship in galvanized
U-bolts in one day at reasonable cost. All you need
are the dimensions (opening width, length, and diameter).
Tom N4KG
On Tue, 25 Sep 2001 22:42:37 -0500 Richard Brown <rjbro@bellsouth.net>
writes:
>
> What is a source for the U bolts that mount the rotor mounting
> plate on
> rohn 25 tower?
> Thanks for the info .
> Dick W5AA
>
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our
> self
> supporting towers up to 100 feet for under $1500!!
> http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|