I have just purchased 10 sections of 10 foot long tower and would like
to find out who was the original manufacturer so I can get the specs.
There is no name plate nor other identifying marks on any of the
sections.
The 3 main legs are made out of 3/4" solid steel rod, and the web
bridging between the main legs is 1/2" solid steel rod. The bridging is
a continuous length of rod, bent to give the zig-zag shape, then welded
to the main legs.
The 10 sections are attached together by three 1/2" thick plates at the
top and bottom of each section using 7/16" bolts.
All sections are hot dip galvanized.
The 10 sections form two separate towers (each tower being composed of 3
sections each for a height of 30 ft. each). The two towers are joined
together at the top by the other four sections mounted horizontally
between the two towers ( a 40 ft. long gangway with expanded metal on
the top surface for walking along). The end result are two towers,
each 30 ft. tall, with a 40 ft. long gangway connecting them together.
The bottom ends of the two towers have the three legs bent in, thereby
narrowing the tower sides, and welded to a central mounting plate for
bolting to a foundation.
At the top end, each of the towers can accomodate a separate mast of
approximately 2" diameter.
Thanks for any help or leads or guesses you can give me.
Glenn
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|