John,
I just finished putting one up this past weekend. The boltheads are 5/8" and
the nuts are 11/16".
Good Luck,
Mike, WA4BPJ
On 10 Sep 2001, at 20:43, kk9a@arrl.net wrote:
>
> I will be building a Rohn 55 tower in Aruba next month. The tower and
> hardware is already there. I need to know what size wrench(s) to bring for
> the leg bolts.
>
> 73,
> John
>
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|