Towertalk
[Top] [All Lists]

[TowerTalk] Paranoid vs. Overkill

To: <towertalk@contesting.com>
Subject: [TowerTalk] Paranoid vs. Overkill
From: wd0t@dakota2k.net (Todd Dravland)
Date: Tue, 11 Sep 2001 00:07:13 -0500
Gary B wrote:
> 
> TowerTalkians...
> 
> My question is simple.  I live in a "70 mph" wind zone according to what I
> can determine.  Can I SAFELY use the 70 mph figure or should I build in
> additional capacity by purchasing a stronger tower?  Using a 'lower spec'
> Trylon tower (eg, T400 vs. T600) means getting a taller tower at
> approximately the same price.  (Remember:  size does matter!)  What would
> you recommend?  How reliable are the 'wind speed' tables?  Do I stand a
> *reasonable* chance of long service and no tower failure using the 70 mph
> figure?  Or does this all boil down to how lucky I feel?!?
> 
> The more I read, the less likely it is that I can make a decision!
> 
> Tnx
> 
> Gary B
> k3gb
> RVN BTO
> 
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com

Gary,

A simple thought for tower construction:  When in doubt, build it stout.

Best to you on your tower project, 73

todd,WD0T

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>