Towertalk
[Top] [All Lists]

[TowerTalk] Improving connectors

To: <towertalk@contesting.com>
Subject: [TowerTalk] Improving connectors
From: W8JI@contesting.com (Tom Rauch)
Date: Thu, 23 Aug 2001 09:47:33 -0400
> Years ago I recall reading about a chemical of some sort that came in a
> tube (I think), which when smeared on the terminals of a plug would
> produce a huge improvement in the quality of the connection to the mating
> socket.

You can silver or gold plate the hardware, but whatever you do DO 
NOT use a conductive goo....or any other type of grease...to flood a 
connector.

The only thing you might want to use is a teflon paste or 100% 
pure silicon grease and use it sparingly. We flooded F connectors 
with it with both without a problem, but that was for receiving 
applications.

For transmitting or higher voltage power connections, I'd only do a 
light coat on the threads and make sure it is a *dielectric* 
compound.

> Does anyone recall this stuff and know where to get it?  I have a couple
> of cranky Jones plugs that I'd like to salvage if I could.

Use a pencil or ink eraser and rub the male contacts clean. WD-40 
the female and plug the male in and out about until you hand falls 
off. Then clean it off with a light hydrocarbon like MEK or pure 
100% alcohol. 

You can give the plug a light coat of silicon dielectric compound on 
the male pins.
73, Tom W8JI
W8JI@contesting.com 

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>