On Mon, 06 Aug 2001 20:24:47 -0400, Steve Maki wrote:
> The above thought also goes for single point guy anchors - if you put
> in a big enough one, it will not be the weak link in the system. Your
> guy anchor should be able to hold the sum total breaking strength of
> the guy wires. In many cases, screw in anchors can not do that.
Another way to put this whole discussion is that the tower itself should
be the weakest link in the whole system, and it should be up to the job
or better.
Gary
ag0n at arrl dot net
http colon slash slash mcduffie dot ws
--
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|