Idea 1 - Replace the 10M trap with a straight piece of aluminum.
Tune to resonance on 15M by adjusting length to 15M trap.
Tune tip to resonance on 20M.
Idea 2 - Do you have the TH6 Reflector? It has a 15M trap with NO 10M
trap.
Tune as above. Insulate at the center.
Tom N4KG
On Sat, 04 Aug 2001 18:12:13 +0000 alsopb <alsopb@gloryroad.net> writes:
>
> I have the driven element of a TH6 here. I want to press it into
> service for a 20/15 rotary dipole only.
>
> I want to somehow eliminate the 10 meter resonance of it to avoid
> coupling to other stuff on the same tower?
>
> Any thoughts/suggestions?
>
> de Brian/K3KO
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our
> self
> supporting towers up to 96 feet for under $1500!!
> http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|