Towertalk
[Top] [All Lists]

[TowerTalk] Pointy Top / Mast Binding - Tips?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Pointy Top / Mast Binding - Tips?
From: n4kg@juno.com (n4kg@juno.com)
Date: Wed, 18 Jul 2001 22:17:34 -0600
Rohn makes 5 different versions of the "Pointy Top" sections

The (original?) 25AG uses a 2 inch OD 16 gauge sleeve.
It is close in appearance to the 25AG-3.  Could this
explain the "tightness" reported by some?

The 25AG-1 uses a 1-1/4 inch "STD PIPE"

The 25AG-2 and 25AG-3 use a 2-1/4 inch OD 14 gauge sleeve.

The 25AG-5 uses a 2-3/4 inch OD 14 gauge sleeve
that does not extend above the top of the tapered legs.

Tom  N4KG



________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>