No heartburn, Eugene. Just take it to them and get your wallet out. :-)
Mine came out great, would have been cheap per mast too if I had 4 or 5 of
them to do. Unfortunately there was a minimum charge to deal with, which
made a single mast about 3 times more expensive to do. I should have done
four and sold the other three to you guys. :-) I think powder coating is
about as expensive as galvanizing, and I suspect you'd ruin the powder
coating with U-bolts, saddles, and handling faster than you would mess up a
galvanized surface. My two cents worth.
73, Jerry W5KP
>
> On 7/12/01 8:34 PM, Eugene Jensen at eugenejensen@nyc.rr.com wrote:
>
> >I have located 1/4 wall 4130N mast in Pa and don't want to go thought the
> >heart burn of having it galvanized.
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|