Steve:
Either will work, I've done it both ways. I like the GA25GD attach method
though. Much
easier to attach the guys', and would be easier to remove if the guy locations
on the
tower needed to be changed. Not sure if it helps tower torqueing (rotation).
If you can afford them, I'd get them.
Steve/n0tu wrote:
> I see Rohn recommends their guy assembly (GA25GD) accessory for attaching
> guys to the tower. How many folks are actually using these verses attaching
> to a single leg? Are these brackets the preferred approach amoungst TTers?
> Since it meets the MFGers specs my guess is this is the way to go? Right?
> Comments?
>
> Any chance someone have some they're not using? Please advise.
>
> FYI, my installation will be 40' (later may go to 60' max) of Rohn 25 w/7sq'
> of antenna 2' above thurst bearing. 3-guy (4A) burried concrete anchors on
> 50ft radius using 3/16" EHS. County wind rating is 85MPH (but I 've seen
> 100MPH plus winds at my QTH!)
>
> Steve/n0tu
>
> List Sponsor: Are you thinking about installing a tower this summer? Call us
> for information on our fabulous Trylon Titan self-supporting towers - up to
> 96-feet for less than $2000! at 888-833-3104 <A
> HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
--
Richard Thorne
Advo Companies, Inc.
806-342-0600
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|