Towertalk
[Top] [All Lists]

[TowerTalk] [Q] ground buss for radials?

To: <towertalk@contesting.com>
Subject: [TowerTalk] [Q] ground buss for radials?
From: w5kp@swbell.net (Jerry Kincade)
Date: Sun, 20 May 2001 17:37:10 -0500
Made one 4 years ago from scrap heavy gauge copper sheet roofing ($1 a pound
at the local metal scrap dealer). Laminated it to a doughnut shaped piece of
1/2" lexan about 18" in diameter, drilled 32 1/4" holes around the
perimeter, attached 16 27' #16 insulated copper radials to that (I have more
to put out), with a single piece of copper strap to the base of a Hy-Gain
14AVQ. Used stainless machine screws/hardware from the Ace Hardware store,
hasn't given me any problems or corrosion yet, works fine. Eventually turned
a nice shade of neutral weathered green, gives a nice camo effect in the
antenna farm.
73, Jerry W5KP



> Does anyone know of a company that makes a ground buss for radials to put
> around a VERT antenna? I am sure I have seen one somewhere, but unable to
find
> it with a web search.
>
> TU TNX
> de Ken n9vv at n9vv dot com



List Sponsor:  Champion Radio Products - We'll be at the Dayton Hamvention
with all of our safety equipment and other products. Stop by booth #559 and
say hi.
<A HREF="http://www.championradio.com";>www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>