Towertalk
[Top] [All Lists]

[TowerTalk] Force 12 C3 spacers

To: <towertalk@contesting.com>
Subject: [TowerTalk] Force 12 C3 spacers
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Wed, 16 May 2001 14:25:34 EDT
In a message dated 5/16/01 9:39:38 AM Pacific Daylight Time, 
aa7bg@3rivers.net writes:

> Can anyone tell me if this is also a potential problem on the C3-XL?

    You mean is this antenna potentially susceptible to driven elements 
wiggling around in the wind? The answer for ALL sleeve-type feed systems is 
yes.

    Is this a problem? Not really. It's more annoying than problematic. 
Remember that the only antenna parameter hams can measure is SWR so some of 
us tend to become relatively anal about *low* swr so anything that upsets it 
- no matter how minor - is viewed with some concern. 

    Would I personally worry about it? Naw. But if you are, feel free to 
fabricate some plastic spacers held by hose clamps out towards the end of the 
shorter elements. Sometimes things are more of a psychological problem than a 
'real' one.

Cheers,   Steve   K7LXC
Tower Tech 

List Sponsor:  Champion Radio Products - We'll be at the Dayton Hamvention
with all of our safety equipment and other products. Stop by booth #559 and
say hi.
<A HREF="http://www.championradio.com";>www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>