Before installation, I drill several 1/4 inch holes in the conduit at the
low-points of the run to exit the water.
Bill, N3RR
----- Original Message -----
From: alsopb <alsopb@gloryroad.net>
To: <towertalk@contesting.com>
Sent: Saturday, April 28, 2001 1:39 PM
Subject: Re: [TowerTalk] Coax
> Guys,
>
> I've seen two schools of thought in running coax in PVC pipe.
>
> The first school thinks it protects the coax.
>
> The second school maintains it guarantees that the coax will sit in
> water.
> If coax is going to sit in water why bother. They maintain it is
> impossible to keep moisture out of the pipe and it accumulates with
> time. They suggest one design where the PVC pipe it it high in the
> center and tips either direction into dry wells at the end. Even this
> design has problems when ground water table rises to the ends of the
> pipes.
>
> What is real world experience with this?
>
> 73 de Brian/K3KO
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|