TTs
I am putting a Force 12 C31XR and EF240s on my 60' tower with a 6'
separation between (the 40m yagi will be rotated 90 deg with respect to the
tribander). I want to mount the T2X rotator as far down the tower as
possible - in fact the nearer the base the better. I have 20' of 2" OD
schedule 40 aluminum tubing for the top section of the mast. I presume that
since the lower section(s) will essentially only have a torsional stress
that I can use less expensive tubing than schedule 40 aluminum.
Any recommendations for the lower section of the mast and what technique I
should use to couple the sections together?
.. sylvan
----------------
Sylvan Katz
VE5ZX & G0TZX
Saskatoon, SK
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|