Force 12 has had their problems with their larger antenna designs...
Seems like almost all of the problems I've heard have related to large
element mountings to the boom. I think perhaps I'll add a bolt or two to
the larger element brackets on mine before I put them up. (I'm putting up
C49xr's and probably 340N's).
It's also possible they've changed the mounting hardware/method on later
production runs.
Perhaps Natan or Tom will comment...
73, Ty K3MM
----- Original Message -----
From: "Pete Smith" <n4zr@contesting.com>
To: "Tom Brown" <tommytrot@hotmail.com>; <Force12Talk@qth.com>
Sent: Tuesday, February 27, 2001 12:35 PM
Subject: Re: [Force 12 Talk] Rivets
> At 05:30 AM 2/27/01 -0500, Tom Brown wrote:
> >Since I have been considering the purchase of a Force 12 antenna, I read
> >with trepidation the comments of owners who have experienced this
"fallout"
> >problem. Is it possible to replace the factory installed rivets with
nuts
> >and bolts? I wonder if it would be wise to do that prior to installing
the
> >antenna?
>
>
> Tom, I am on my 3d F12, and have all 3 still up in the air. They are all
> the standard-duty models, and I have had ZERO problem with any rivets in 4
> years.
>
> 73, Pete N4ZR
> Contesting is!
>
> The World Contest Station Database
> is waiting for your input at
> http://www.qsl.net/n4zr
>
>
>
>
> --------------------------------------------
> Force12Talk mailing list provided as a service by Force 12 Antennas, Inc.
> Force 12 Web site: http://www.qth.com/force12
>
> Submissions: send to Force12Talk@qth.com
> To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com
> Force12Talk Message Archive: http://list.qth.com/archive/force12talk
> For problems with the list, contact n4zr@qth.com
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|