[TowerTalk] Orion rotator reed switch failures

[Larry Alkoff" <labradley@mindspring.com (Larry Alkoff)]

My M2 Orion rotator reed switch has failed for the second time in 6 months
during a lightning storm that did no other damage.

Each failure requires climbing to the top of 120 foot tower, dismounting rotator
to replace reed switch, then re-installing rotator.

This is really getting old,  especially since it likes to happen the day
before a major contest!  The good news is I have Africa covered <g>

I have two questions.

1.  Does anyone have any thoughts on "protecting" the reed switch?
     Can it be zapped back to life?
     Note:  The rotator power and control cables are protected
                by Polyphaser devices both at the bottom of the tower and the 
shack.

2.  What other make of  rotator could replace the Orion to turn a stacked C31XR 
and Cushcraft XM-204?

73 Larry Alkoff N2LA




Larry Alkoff N2LA - Austin TX





Larry Alkoff N2LA - Austin TX



--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com