Towertalk
[Top] [All Lists]

[TowerTalk] Re: WTB Positioning Pots

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: WTB Positioning Pots
From: nt6b-vk7lm@dreamsoft.com (Lonnie (NT6B))
Date: Fri, 02 Feb 2001 10:17:49 -0800
Hello to the group....I am looking for a source for a positioning 
Potentiometer, with the parameters of:  500 Ohms, Wire wound, Single turn 
(very important) precision potentiometer.  This pot will hopefully have a 
shaft approx. 1/4 inch in diameter. I want to change out my Selsyns on my 
prop pitch motor and controller and be able to use a CDE or HyGain control 
box for the dial indicator.  A friend of mine in Europe has made this 
conversion and it seems to work fine for him.

Your input is appreciated...Have a good weekend from Sunny, Warm, Southern 
California.


73's......Lonnie  (NT6B)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>