On 1/18/01 3:30, KB7WW Art Moe at kb7ww@chatusa.com wrote:
>Getting ready to put up a used A3s and can't seem to find one thing
>in the manual. When inserting the first section of tubing into the
>center sections, how much should inserted. from the manual the centers
>are EA and the first sections are EC and EE. On the driven element
>the same questions ED into EB.
Well, to take the Reflector (element #1) as an example:
EC must be inserted over trap TA until the end of EC is 3/8" from the end
of the trap TA. Just insert EC into EA until you end up with the desired
dimension A1, less 3/8" for trap TA.
The exact amount will vary depending on the dimensions you select from
chart 1.
Bill Coleman, AA4LR, PP-ASEL Mail: aa4lr@arrl.net
Quote: "Not within a thousand years will man ever fly!"
-- Wilbur Wright, 1901
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|