In a message dated 1/15/01 3:20:50 PM Pacific Standard Time,
baycock@HIWAAY.NET writes:
> I bought a 25g FOLDOVER, used. With it, there were several bases- one of
> them was for a TILTOVER. They CAN be used together. The tiltover base DOES
> use J-bolts, to mount the fixed part of the metal base to the concrete
base.
>
>
> This type of base has two parts- one is a plate that is bolted to the
> concrete. It has hinge and bolt-down features. The other part fits to the
> normal straight section, and has the other half of the hinge, and a part to
> lock it into place. The J-bolts use at least two nuts each, to allow
> adjustment to vertical.
FB. Now what do you use to TILTOVER the tower? I've never seen a Rohn
fixture for that although US Tower crank-ups can have them.
Cheers, Steve K7LXC
Tower Tech
Champion Radio Products
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|