AL.
If you buy a single guy ring and one of our elevated rotors you can rotate
50ft of tower (20' below and 30' above the guys). for about the same cost
!!!!
Take a look at www.qth.com/k0xg
Something to think about ????
73 de Rich K0XG
----- Original Message -----
From: "Al Williams" <alwilliams@olywa.net>
To: <towertalk@contesting.com>
Sent: Saturday, January 13, 2001 3:08 AM
Subject: [TowerTalk] mast intrusion into tower
> Two recent postings have 8' of a 21' mast and 6' of a 12' mast inside the
> tower. Why so much, if the
> bottom end of the mast is bolted to a sturdy rotator and mounting plate?
>
> I am planning to put a 11 sq ft windload antenna at the top of a 20'
Chrome
> mast that will bolt to a
> Orion 2800 rotator sitting inside the LM470 tower. The antenna to be is a
> Force12 Magnum 2/2
> for 80 & 40 so I want as much height as can be safely achieved.
>
> I will appreciate comments on how far to insert the mast and also whether
> the 80-85 foot height
> is adequate for the 80 beam.
>
> k7puc
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|