Sounds like a good approach, Bruce. Thanks for the idea.
Doc, N9AM
----- Original Message -----
From: <SavageBR@aol.com>
To: <ve6yc@home.com>; <spindoc@digital.net>; <towertalk@contesting.com>
Sent: Wednesday, November 10, 1999 8:36 PM
Subject: Re: [TowerTalk] Copper and Aluminum
> You might also consider using slightly over sized stainless steel hose
clamps
> around the tower leg. Because the clamp is oversized, you can slip the
Cu
> strip in between two layers of stainless steel, the outer layer and
the inner
> "overlap" layer of the clamp. The inner overlap layer will space the
Cu from
> the tower leg. I have been doing this for a long time with no
problems.
>
> Bruce AA4Z
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|