75' is a little low for optimum performance for 40M DX, but it will sure
beat the heck out a sloper. I would look at the new force 12 40M elements
that are 85% of full length. I do know if they have adopted them for the
EF-240 yet, but when they do take a look at that. If you can model and feel
good about no interaction, the Cushcraft XM 240 works well, too.
73 John N5CQ
-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com]On Behalf Of Brian Smithson
Sent: Thursday, October 28, 1999 2:34 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 40m beams
Hi all!
As the base for my 2nd Trylon cures, I'm contemplating the
beams. I have 24' of 1/4" 4130 that will leave 16' sticking
out the top. I plan on a 12/17 beam on top and I'd like a
reasonable signal on 40. I have a C31XR on the first tower
that works great.
I'm struggling with my options. I have no experience home-
brewing beams but until a year ago, I could say the same
about tower installation!
I've heard good things about the 2 and 3 element F12
designs, as well as Cushcraft. It has also been suggested
that I consider homebrewing a full-size 2el 40.
I thought I'd post a query to the TT experts - what would
you do if you were putting a single 40m beam at 75'? What
do you think about the linearly-loaded designs vs. full-
sized? I'm interested in the trade-offs in gain, bandwidth,
and rotor-load.
Any thoughts?
Thanks, and see you in WW!
-brian n8wrl
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|