Towertalk
[Top] [All Lists]

[TowerTalk] Exothermic Welding?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Exothermic Welding?
From: Tower2sell@aol.com (Tower2sell@aol.com)
Date: Tue, 26 Oct 1999 11:29:52 EDT
In a message dated 10/24/99 10:04:03 AM Central Daylight Time, K7LXC@aol.com 
writes:

<<        Another common product is CadWeld. It's available from 
industrial-type 
 suppliers. The molds run fifty bucks more or less and the shots are $4-5. 
You 
 need a separate mold for each type of connection. You can spend a hundred 
 bucks or more real easy on this stuff but it's what the pros use.
 
 Cheers,  Steve   K7LXC
 Tower Tech
  >>
While working at a utility company I experimented with slightly modifying the 
molds because they did not have one to fit the exact diameter ground rod. The 
mold was made of carbon and the existing holes could be easly drilled larger 
That experimant went fine and and went into field use.

Tower2sell@aol.com

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>